pneum. special devices

contour sander / profil sander / line sander / band sander


Konturenschleifer

RAX-L1 x

technical data:
  • weight 550g
  • air consumption 110 Liter/min.
  • hub 4mm by 4.000 H/min.
  • compressed air 6,2bar
  • finger sander – clip area 15 x 65mm

Konturenschleifer

RAX-L1 xx

technical data:

  • weight 550g
  • air consumption 110 Liter/min.
  • hub 4mm by 4.000 H/min.
  • compressed air 6,2bar
  • finger sander – clip area 15 x 65mm

Konturenschleifer Set 1

RAX-L1 Set 1

 
11-parts

 

 

 

 


Konturenschleifer Set 2

RAX-L1 Set 2

 
14-parts

 

 

 

 


band sander, rasp, mini-flex, scraper, gouge hammer pneumatic

for metals, gfk-PES, and more


Mini-Flex mini-flex

  • capacity 240 Watt
  • engine speed 18.000 UpM
  • air consumption115 Liter/min. bei 6,3bar
  • L,W,H 135/65/93 mm
  • noice 83 dB(A)
  • weight 550g

Schleiffeilerasp

  • hubs/min. 3.700
  • hub length 9mm
  • spindel 6mm
  • air consumption 8 Liter/min. bei 6,3bar
  • L,W,H 185/42/45 mm
  • noice 85 dB(A)
  • weight 1000 g

Hand-Bandschleiferhand-band sander

  • engine speed 18.000 UpM
  • air consumption 350 Liter/min. bei 6,3 bar
  • L,W,H 320/78/80 mm
  • noice 83 dB(A)
  • weight 900g

Schaber

pneumatic gouge

  • short version + long version
  • 4,7 kg, 62 cm length, if you wish also 122 und 182 cm length
  • with a 100mm width gouge
  • air consumption 2.000 liter/minute

Meisselhammer - Schaber

pneumatischer Meißelhammer / Schaber

  • heavy quality with 4,8kg, 38 cm length
  • with a 70mm width gouge
  • air consumption 2.000 liter/minute

 


pneumatic bar grinder


Stabschleifer klein

RL-STS1K bar grinder small

for mounting of sharpening sticks tim max. 8mm
  • stabil run
  • max. 25.000 rpm
  • 91 dB(A)

Stabschleifer langRL-STS1L bar grinder long

  • for mounting of sharpening sticks tim max. 8mm
  • stabil run
  • max. 25.000 rpm
  • 91 dB(A)

Stabschleifer gewinkeltRL-STS1W bar grinder angulate

  • for mounting of sharpening sticks tim max. 8mm
  • stabil run
  • max. 25.000 rpm
  • 91 dB(A)

 


pneumatic drilling machines


Bohrmaschine

RL-BM 1

with gear for low engine speed and high power
right and left run possible
  • capacity 500 Watt
  • engine speed 450 U/min.
  • weight 1,4 kg
  • air consumption 380 l/min.
  • air connector ¼ “ IG
  • noice 85 dBA
  • boring socket 13mm + boring socket key

 


BohrmaschineRF-4400

with two planet gear drives for low drive and high power
exit air thrue the handle
with soft start: to avoid of paint splashes
  • capacity 500 Watt
  • engine speed 500 U/min.
  • weight 1,65 kg
  • air consumption arround 400 l/min.
  • air consumption continuous 530 l/min.
  • air connector ¼ “ IG
  • noice 83 dBA
  • boring socket 13mm fast montage boring socket

Bandschleifer

DY-11477 extra powerful band grinder - ideal for using with robot

  • engine: 2,0 PS = 1,5 kW
  • noice: 82 dB(A) = sehr leise
  • air consumption max. = 2.000 l/min.
  • weight = 6,4kg
  • measurement: length= 546mm, hight= 197mm
  • band width: 2 inch = 50mm (also 25mm deliverable)
  • different long contact arms
  • abrasive band length: 30 inch = 762mm/42 inch = 1067mm/54 inch = 1372mm/60 inch = 1524mm
  • abrasives in grain of 60. 80, 120, 180, 240, 320

FingerschleiferDY-57930 finger-grinder

 
 
 

KonturenschleiferDY-58000 + DY-58010 contour grinder

 
 
 
 
 

PaneelschleiferDY-57906 panel grinder

 
 
 
 
 

Linearschleifer

DY-51350 line grinder

  • 2.400 hubs/min á 10mm length
  • length 280mm
  • width 70mm
  • noice 84 dB(A)
  • air consumption 510 l/min.
  • air connetor ¼ Zoll

Linearschleifer

DY-57407 line grinder

  • 2.400 Hübe/min á 10mm length
  • length 203mm
  • width 70mm
  • noice 85 dB(A)
  • air consumption 510 l/min.
  • air connetor ¼ Zoll

Oberfräse

DY-51330 hand-router pneumatic

  • Leistung: 522 Watt
  • UpM: 20.000
  • noice: 85 dB(A)
  • air consumption : 963 l/min.
  • Gewicht: 1,1kg
  • air connetor: ¼ NPT
  • Spindel: 3/8“
  • Auflagefläche: 83 x 89mm
  • Höhe: 210mm

Hand-Bandschleifmaschine

DY-14000 Hand – band grinding machine / file