Select your language

 

Glue pump with heater

 

Our glue pump is a pneumatic moved piston pump with integrated heater and electronic control, what can transport glue in both moves of the piston. The hub rate (max. 2 Hz) can shown in the display. As soon as the pump is started, the transport of glue begins immediately and it will be realizzed by a suction valve and a pressure valve. The transport capacity will be adjusted by a valve on outlet air.

Advantage:

• Easy adjustment of the glue temperature on the screen
• reproducible adjustment of the transport capacity
• integrated maintenance screen
• very good cleaning and flushing behavior (reduce the death space capacity)
• waterproof (IP66)
• material protecting onheat behavior
• integrated electronic control
• low compressed air usage and limited power consumption

Fields of application:

On all places, where a labeling is necessary by filling of bottles, doses, glasses and more.

 

Technical data:

drive pneumatic
drive principle self sucking
suction height approx. 2 m (20 °C, by water)
transformation ratio 3,8 : 1
fluid quantity by water
max. 33 cm³ per dobble hub
(4 l/min / 240 l/h bei 2 Hz)
media temperature max. 50 °C – electronic controled
viscolity of media max. 100.000 mPas
low pulsation media transport in suction- and in
pressure move
connection sucking side sucking tube (standard length 420mm)
connection pressure side socket bead, 19 mm
weight 6,9 kg
hub spped max. 2 Hz
   


Material:

case upper part ABS
case lower part POM
case suction foot stainless steel
liquide valve balls stainless steel
heater tube stainless steel
piston rod stainless steel
heater stainless steel
pull rod(2 pcs) stainless steel
bead (19 mm) stainless steel
handle stainless steel
suction and pressure valves FKM
O-ring FKM

 

Programmiermöglichkeiten:

• temperature screen C°/ F
• pre choice media temperature
• hub count
• hub frequency screen
• NFC: data transfer via android-smartphone or -tablet
• maintenance interval screen

 

Elecric data:

Electrinc connection
(110 V - version available)
200 - 240 V, 50/60 Hz

wattage

approx. 950 W by max. heater capacity
temperature control electronic
temperature area adjustable to +50 °C
temperature adjustment via display with foil keyboard/
App
case IP66
SPS-connection available


Pneunatic Data:

compressed air connector plug nipple 7,2 NW
operating pressure 3 - 6 bar filtered compressed air
air consumption max. 170 l/min by max. capacity
power unit 5/2-way valvel, electic


Media:

The pump made for transport different liquides (media). The resistance of media is to proof inindividual case. In this questions please use our support team.

 



The glue pump with heater is available as container pump as well.

 

Glue pum without heater:

Ther version will be in use, when an aditional heating of the media is not necessary.
The transport capacity of the media will adjusted by a outlet air valve.

 

Advantage:

• water proof (IP66)
• very good cleaning and flushing behavior (reduce the death space capacity)
• low compressed air usage

 

Technical data:

drive pneumatic
drive principle self sucking
suction height approx. 2 m (20 °C, by water)
transformation ratio 3,8 : 1
fluid quantity by water
max. 33 cm³ per dobble hub
(4 l/min / 240 l/h bei 2 Hz)
viscolity of media max. 100.000 mPas
low pulsation

media transport in suction- and in
pressure move

connection sucking side sucking tube (standard length 420mm)
connection pressure side socket bead, 19 mm
weight 6,9 kg
hub spped

max. 2 Hz

 

Material:

case upper part ABS
case lower part POM
case suction foot stainless steel
liquide valve balls stainless steel
tube stainless steel
piston rod stainless steel
pull rod(2 pcs) stainless steel
bead (19 mm) stainless steel
handle stainless steel
suction and pressure valves FKM
O-ring FKM

 

Pneumatic data:

compressed air connector plug nipple 7,2 NW
operating pressure  3- 6 bar filtered compressed air
air consumption max. 170 l/min by max. capacity
power unit 5/2-Wege Ventil, pneumatic

 

Media:

The pump made for transport different liquides (media). The resistance of media is to proof inindividual case. In this questions please use our support team.

 

 

 Available accessories:

glue top complete
mounting ring
glue top alone
glue cone with dobble sieve of stainless steel
compressed air connection unit
product tube